connectorbops.blogg.se

1. #Smith and wesson 915 manufacture date serial number
2. #Smith and wesson 915 manufacture date professional

#Smith and wesson 915 manufacture date serial number

You can enter your serial number at to see if it is included in this announcement. What To Do If You Own A M&P 15-22Īny M&P 15-22 rifle manufactured after Februis subject to this safety issue. Even if you just purchased a M&P 15-22 in the past few weeks, it is still recommended you check the serial number to check the date of manufacture. Smith & Wesson believes the issue is limited to a small number of rifles, however they are recommending any consumer who owns a M&P 15-22 have the bolt inspected just in case. Secondly, if the bolt is closed with a round in the chamber and a loaded magazine inserted, depression of the trigger may result in multiple discharges. The Smith & Wesson K-38 Combat Masterpiece, Revolver Model 15 is a six-shot double-action revolver, with adjustable open sights, built on the medium-size K frame.It is chambered for the.38 Special cartridge and is fitted with a 4-inch (100 mm) barrel, though additional barrel options have been offered at various times during its production. If the bolt release is activated with a loaded magazine in the rifle, it may cause the cartridge to discharge without any pull of the trigger. This insufficient depth may cause the bolt, when closed, to crush the rim case and cause an accidental discharge or multiple discharges.

More On The Potential MalfunctionĪs stated above, Smith & Wesson has identified a production run of M&P 15-22 rifles where the breech face counter bore depth was not manufactured to specification.

#Smith and wesson 915 manufacture date professional

It is recommended that you have a qualified professional inspect the bolt, or you can send the bolt back to Smith & Wesson for inspection. The company has identified a manufacturing defect in breech face counter length bore depth of the rifle.

If you have purchased a Smith & Wesson M&P 15-22 Rifle made before February 1, 2019, then Smith & Wesson recommends you not fire it until it has been inspected and the bolt replaced (if needed).